Unused, unfinished 21 fret maple neck with maple fingerboard, perfect for your custom bolt on Tele project! Cut the headstock in any fashion to fit your design. The choice is yours!

• 25-1/2" Scale length (Fender Tele & Strat)
• Made from select Canadian maple
• 12" radius fretboard
• Pre-fretted with truss rod
• Unfinished, maple fingerboard with dot inlays
• Pre-cut black top nut
• Pre-drilled holes for tuning machines and 8mm ferrules
• Telecaster style neck heal
• Width at nut: 43mm / 1-11/16"
• Width at heal: 55mm / 2-3/16

New, unfinished 21 fret maple neck with rosewood fingerboard, perfect for your custom bolt on Tele project! Cut the headstock in any fashion to fit your design. The choice is yours!

• 25-1/2" Scale length (Fender Tele & Strat)
• Made from select Canadian maple
• 12" radius fretboard
• Pre-fretted with truss rod
• Unfinished, rosewood fingerboard with dot inlays
• Pre-cut white top nut
• Pre-drilled holes for tuning machines and 8mm ferrules
• Telecaster style rounded neck heal
• Width at nut: 43mm / 1-11/16"
• Width at heal: 55mm / 2-3/16"

Undrilled 21 fret maple paddlehead neck with maple fingerboard, perfect for your custom bolt on guitar project! Cut the headstock in any fashion to fit your design for a 6 or 12 string guitar project. The possiblities are endless!

• 25-1/2" Scale length (Fender Tele & Strat)
• Made from select Canadian maple
• 12" radius fretboard
• Pre-fretted with truss rod
• Unfinished, maple fingerboard with black inlays
• Pre-cut black top nut
• Stratocaster style rounded neck heal
• Paddle Head: 127mm x 194mm / 5" x 7 5/8"
• Width at nut: 43mm / 1-11/16"
• Width at heal: 55mm / 2-3/16"
• Neck heal undrilled
• Ready for final cutting, finishing and installation

The standard for bolt on neck mounting- in shiny chrome!

Traditional style chrome neck plate with four chrome oval head screws and a black plastic under-plate washer to protect your finish. If you need to mount a Fender style guitar neck, this is exactly the ticket!

They look and act very much like Klusons (but they're not) and are A LOT less expensive! These nickel plated vintage style guitar tuning machine heads are made in Korea and are fitted to a number of vintage style strat and tele style guitars. I was surpised, frankly, at how solid these tuners feel considering their price point. Use these for your DIY relic Tele or Strat project. They're a great deal!

Vintage Style Nickel Guitar Tuning Machine Head Bushings (also known as ferrules or eyelets...)

Back in April I received a new shipment of these basswood body blanks and I am still very excited about them! These solid, multipiece blanks measure out to just about 16in x 20in- perfect for most guitar body shapes. These are perfect for dark stains and dyes as well as solid colour finishes including nitro and acrylic lacquers. They have been thickness planed to 1.75in but will require some sanding after cutting. I have 35 out of the original 50 so hurry!

Shipping Note: These body blanks are solid timber and are not exactly the cheapest to ship. P&P shown below is for Mainland UK only. The Isles, Ireland, and Europe will be more. If you'd like to collect your prepaid body blank, we are happy to help you save some money! Please contact us for more info.

Good quality replacement bridge and posts for Les Paul and other Gibson style guitars with import string spacing. Just to be clear this is not a Gibson part. But it sure is good lookin'! ABR style chrome tune-o-matic bridge with threaded posts and thumb wheel adjusters, traditional single retaining clip and pre-notched saddles- all in shiny chrome!

It looks and acts very much like a Bigsby B5 (but it's not) and is A LOT less expensive!

This vintage-style vibrato is a good, economical version of that famous B5 machine used by many notable guitarists to add that unmistakable subtlety that only a vibrato can add. This vibrato features a cast frame, steel tension and string bars, and a cast, moveable arm. The metal work is pretty good for a Korean made tailpiece. And at this price, it is a stylish and practical addition to your DIY guitar project.

Good quality chrome diamond bar trapeze tailpiece as used on many Gibson and Epiphone style archtop electric and acoustic guitars.

Approximately 1.5" / 38mm from hinge to bottom of mounting plate and 5" / 100mm from hinge to end of string retaining bar. If your application calls for a shorter tailpiece, the rods can be shortened and re-threaded. Includes three mounting screws.

Good quality chrome plain bar trapeze tailpiece as used on many Gibson and Epiphone style archtop electric and acoustic guitars.

Approximately 1.5" / 38mm from hinge to bottom of mounting plate and 5" / 100mm from hinge to end of string retaining bar. If your application calls for a shorter tailpiece, the rods can be shortened and re-threaded. Includes three mounting screws.

New S/S/S, 11 hole scratchplate in great looking tortoise shell effect. This three ply beauty is brand new, B/W/Tortoise with the protective film intact. I was told that it was made in Korea by the same factory that supplies a number of "big name American guitar manufacturers." Can you guess which ones?

NOTE: As with any scratchplate refit, some redrilling and modification may be required. This scratchplate shape should fit most non-USA Stratocaster style guitars. It is quite probable that the holes in the pickguard will not line up exactly with the holes in your guitar. Yes, even Fender guitars too! Simply redill the holes. You can do it!

New S/S/S, 11 hole scratchplate in great looking white pearloid. This three ply beauty is brand new, B/W/White Pearloid with the protective film intact. I was told that it was made in Korea by the same factory that supplies a number of "big name American guitar manufacturers." Can you guess which ones?

NOTE: As with any scratchplate refit, some redrilling and modification may be required. This scratchplate shape should fit most non-USA Stratocaster style guitars. It is quite probable that the holes in the pickguard will not line up exactly with the holes in your guitar. Yes, even Fender guitars too! Simply redill the holes. You can do it!

New S/S/S, 11 hole scratchplate in great looking cream pearloid. This three ply beauty is brand new, B/W/Cream Pearloid with the protective film intact. I was told that it was made in Korea by the same factory that supplies a number of "big name American guitar manufacturers." Can you guess which ones?

NOTE: As with any scratchplate refit, some redrilling and modification may be required. This scratchplate shape should fit most non-USA Stratocaster style guitars. It is quite probable that the holes in the pickguard will not line up exactly with the holes in your guitar. Yes, even Fender guitars too! Simply redill the holes. You can do it!

New S/S/S, 11 hole scratchplate in great looking black pearloid. This three ply beauty is brand new, B/W/Black Pearloid with the protective film intact. I was told that it was made in Korea by the same factory that supplies a number of "big name American guitar manufacturers." Can you guess which ones?

NOTE: As with any scratchplate refit, some redrilling and modification may be required. This scratchplate shape should fit most non-USA Stratocaster style guitars. It is quite probable that the holes in the pickguard will not line up exactly with the holes in your guitar. Yes, even Fender guitars too! Simply redill the holes. You can do it!

New S/S/S, 11 hole scratchplate in three-ply White/Black/White with the protective film intact. Well made, straight forward and ready for your favorite pickups, pots and switch!

NOTE: As with any scratchplate refit, some redrilling and modification may be required. This scratchplate shape should fit most non-USA Stratocaster style guitars. It is quite probable that the holes in the pickguard will not line up exactly with the holes in your guitar. Yes, even Fender guitars too! Simply redill the holes. You can do it!

New S/S/S, 11 hole scratchplate in three-ply Black/White/Black with the protective film intact. Well made, straight forward and ready for your favorite pickups, pots and switch!

NOTE: As with any scratchplate refit, some redrilling and modification may be required. This scratchplate shape should fit most non-USA Stratocaster style guitars. It is quite probable that the holes in the pickguard will not line up exactly with the holes in your guitar. Yes, even Fender guitars too! Simply redill the holes. You can do it!