Guitar Body Blanks and Top Wood
Guitar Body Blanks and Top Wood
Scratchplates
Pickups
Pots, switches, output jacks
Neck mounting plates, mouting screws, truss rods, etc.
Custom headstock cutting and shaping, body routing, and more from DIY Guitar Shop!
TomoTone UK Auctions on Ebay UK
TomoTone UK Auctions on Ebay UK
 
 
Solution Graphics
Mounting Screws

 

Top Wood
Bookmatched AA Sitka Spruce Guitar Top Tonewood Set

Click for larger image (New Window)

Back in 2009, I purchased a few sets of this bookmatched AA Sitka Spruce top wood from a notable Luthier in Washington State, in the Pacific Northwest of the US. At that time this beautiful, favoured tonewood had been drying for over two years. A year later these are perfect and ready for use in acoustic and semi-acoustic instrument builds.

This A+ to AA grade top wood features very consistant colour, straight tight grain (~12 grain lines per inch) and good stiffness to provide great tone and strength.

Each quartersawn half top measures just over 7.75in x 22in / 19.75cm x 56cm and have been thicknessed to approximately .140in / 4mm thick. Average weight is approximately 180g per piece.

Approx. .75kg weight when packed. P&P to UK is £6
# TWSS01
£22.00
Dimensions (per piece): 197.5mm x 560mm x 4mm / 7.75 x 22 x .140in (max)
Have questions? Shoot an email to us at info@diyguitarshop.co.uk
Body Blanks
SALE!Multi-Piece Solid Basswood Guitar Body Blank

Click for larger image (New Window)

 

These solid, three or four piece pre-glued Basswood body blanks measure out to just under 16in x 20in- perfect for most guitar body shapes. These are perfect for dark stains and dyes as well as solid colour finishes including nitro and acrylic lacquers. Basswood is a great timber to work with because it requires little or no grain filling and it's easy to cut and rout. They have been thickness planed to just shy of 1.75in but will require some sanding after cutting.

Shipping Note: These body blanks are solid timber and are not exactly the cheapest to ship. P&P shown below is for Mainland UK only. The Isles, Ireland, and Europe will be more. If you'd like to collect your prepaid body blank, we are happy to help you save some money! Please contact us for more info.

imensions: 485 x 450 x 44mm / 16 x 19 x 1.75in MAX
# BBB002

£32.50 £27.50

4.75kg avg weight. P&P to Mainland UK is £8 Outside of Mainland UK- Additional postage will be required. We will invoice you for the additional amount. Please see our Shipping Page for info. In stock now!
Multi-Piece Solid Alder Guitar Body Blank

Click for larger image (New Window)

These solid,three or four piece pre-glued Alder blanks measure out to just under 16in x 19in- perfect for most guitar body shapes. Alder These are perfect for clear finishes or oils as well as solid colour finishes including nitro and acrylic lacquers. Alder has a nice amount of figureing and is a great timber to work with because it requires little or no grain filling and it's easy to cut and rout. They have been thickness planed to approximately 1.75in but will require some sanding after cutting.

Shipping Note: These body blanks are solid timber and are not exactly the cheapest to ship. P&P shown below is for Mainland UK only. The Isles, Ireland, and Europe will be more. If you'd like to collect your prepaid body blank, we are happy to help you save some money! Please contact us for more info.

Dimensions: 485 x 450 x 44mm / 16 x 19 x 1.75in MAX
# BBA002

£37.50

4.75kg avg weight. P&P to Mainland UK is £8 Outside of Mainland UK- Additional postage will be required. We will invoice you for the additional amount. Please see our Shipping Page for info.
Have questions? Shoot an email to us at info@diyguitarshop.co.uk
"Stratocaster", "Strat", "Telecaster", "Tele, and "Fender" are registered trademarks of FMI Inc. "Les Paul" is a registered trademark of Gibson Guitars Inc. TomoTone DIY Guitar Shop is in no way affiliated with FMI or Gibson Guitars.

All content © 2007-2011 TomoTone / DIY Guitar Shop unless otherwise noted. All rights reserved.